Traits

A shaggy werewolf-esque pal.

Lykoi Rixixi have a shaggy coat of fur that gives way to thin and bald patches. Their bald spots have the same rules as Sphynx, but localized to those bald patches:

• Any legal skin tone may be used - this includes natural mammal skin tones (including chow blue), lighter/darker than base, or any color found in their markings.
• If using a skin color instead of a regular base coat color: Lighter/Darker than base markings can use the skin color or the base coat.
• As skin can legally have spotting on it: Some minor spotting is legal anywhere on the bald patches, but it's best to keep it from being too extensive - consider it several instances of the free mark Birthmark, not to be confused with Inkblot.
• Flourish can display anywhere on the bald patches.
• Lava Lamp does not need to appear translucent.

As the rest of Lykoi is intended to be shaggy and thin, it's legal to show the skin color through the fur without albinism, bicolor, forgeblood, or similar mutations! Lykoi also has a more extensive 'thin fur' section (really, anywhere on the underside and tail is fair game) and you're free to be patchy and asymmetrical about it.

Lykoi's bases can be found here:
Standard Lykoi
Primal Lykoi
Domestic Lykoi
Funerary Lykoi
Dwarf Primal Lykoi

Lykoi is a combination mutation:
Lykoi has a 20% chance of passing when both Sphynx and Long Fur (or Lykoi itself) are present in the breeding. Combination Mutations do not automatically pass if both mutations that make it up make it onto a Rixixi.

Instead of the traditional body build, the Ixi has an upright upper body and a quadrupedal lower body, leading to at least six limbs overall.

• Due to their larger body, Centaurs can weigh up to 200lbs more than other Rixixi of their type, regardless of subspecies.
  
• Markings in the area can extend to this mutation.
• Marking ranges roughly mirror the main body, and lenience is given here due to a lack of actual ranges - markings on the back of the main body can show up on the back of Centaur, markings on the underbelly show up on the underbelly of Centaur, markings on the original limbs' range can show on the extra pair of limbs, and so on.

Centaur is a combination mutation:
Centaur has a 20% chance of passing when two instances of Sleipnir (or Centaur itself) are present in the breeding. Combination Mutations do not automatically pass if both mutations that make it up make it onto a Rixixi.
If a Mutation Station is used, Sleipnir can present visibly on the design without being present in the geno.

Fins grow on the body. Gills are present and follow their original mutation's rules.

• Markings in the area can extend to this mutation.
• The opacity of this mutation can be freely altered as long as the mutation is still clearly visible.
• The Gills can take on the color of any base coat or any marking found on the Rixixi.

Deep Sea is a combination mutation:
Deep Sea has a 20% chance of passing when both Gills and Vestigial Wings (or Deep Sea itself) are present in the breeding. Combination Mutations do not automatically pass if both mutations that make it up make it onto a Rixixi.
If a Mutation Station is used, Vestigial Wings or Gills can present visibly on the design without being present in the geno - one Mutation Station is required per mutation.

A cape of wing-like fins, cephalic fins around the mouth, and a few spines on the tail. Displaced vents on the chest complete the psuedo-ray look.

• Markings in the area can extend to this mutation. The Ray 'mantle' can count as additional limbs for markings that affect points.
• The chest vents can be any legal flesh or skin color for the Rixixi, or can show the Rixixi's blood color on part or all of the mutation if desired - by default, Rixixi blood is red, but it can be modified by certain markings and mutations.

Ray is a combination mutation:
Ray has a 20% chance of passing when both Tail Spike and Vestigial Wings (or Ray itself) are present in the breeding. Combination Mutations do not automatically pass if both mutations that make it up make it onto a Rixixi.
If a Mutation Station is used, Vestigial Wings or Tail Spike can present visibly on the design without being present in the geno - one Mutation Station is required per mutation.

A protective covering over the Rixixi's wings. Usually beetle- or turtle- like.

• The shell of Shield Wings can use any of the following colors:
  • Lighter or Darker than the base color (or the base color itself)
  • Any Base Coat Color
• Shield Wings can have shading and shine, but requires the Iridescent gene to have multicolored iridescence. Markings can extend to it, much like with other wing types.
• If Shield Wings is present with another wing type, you can make a custom "shield" such as one that resembles beetle eltyra, a turtle shell, or Fantasy variants of either of those (eg: something like the Primal Shield Wings base, mountainous/island-like turtle shells, etched or fae-like beetle shells, etc)

Shield Wings is a combination mutation:
Shield Wings has a 20% chance of passing when both Insect Wings and Shell (or Shield Wings itself) are present in the breeding. Combination Mutations do not automatically pass if both mutations that make it up make it onto a Rixixi.
If a Mutation Station is used, Insect Wings or Shell can present visibly on the design without being present in the geno - one Mutation Station is required per mutation.

Most of the Rixixi's body is translucent, showing the internal organs and bone structure. The original base coat and markings should still be visible, but should be translucent or tinted with the Ixi's blood color.

• The Ixi should have translucent skin, with their internal structure visible in some way - musculature, bones, blood color tinting the entire design, etc.
• Turning the entire Ixi's translucence down and putting an Ixi-shaped layer of their blood color beneath them is generally a good way to tint the whole design!
• While internal organs can show in Translucent, please don't make them extremely graphic and gory - something one might find in an anatomical model is fine! Something extremely veiny or necrotic is best saved for your own art. We'd rather not use the mature filter on the masterlist if we can help it.
• Unless altered by a mutation, flesh/organ colors should be within reasonable flesh/organ colors, and bones should be believable as a bone color (discoloration is absolutely allowed, paint would have to be applied via cosmetics, etc. - I'm not going to ask how you got paint inside your body, I'm assuming surgery.)

Optional design packs for adding a skeleton:
Translucent Design Pack #1 (Standard)
Translucent Design Pack #2 (Primal)
Translucent Design Pack #3 (Domestic)
Translucent Design Pack #5 (Dwarf Primal)
Translucent Design Pack #4 (Dragon Body Standard)
Translucent Design Pack #4.2 (Dragon Body Primal)
Translucent Design Pack #4.3 (Dragon Body Domestic)

Translucent is a combination mutation:
Translucent has a 20% chance of passing when both Albinism and Fogshard (or Translucent itself) are present in the breeding. Combination Mutations do not automatically pass if both mutations that make it up make it onto a Rixixi.
It can also be passed naturally at a common or uncommon rate by Domestics.
If a Mutation Station is used, Albinism or Fogshard can present visibly on the design without being present in the geno - one Mutation Station is required per mutation.

Bicolor appears as usual, except that the white fur is over translucent skin. Translucent mutation appears only over bicolor mutation.

Funerary Rixixi have Partial Translucence by default. This should always be visible unless replaced by Translucence or Ghost. It can be edited - moved, increased, reduced, etc - as long as it still covers 30-80% of the body.

Much like Bicolor, Partial Translucence appears in patches that cover parts of the Rixixi, but instead of white patches, the skin and fur are translucent. Markings can show on top of the translucent patches, as long as the patches are still clearly translucent.

Unlike Bicolor, Partial Translucence can cover a bit less of the body if desired - anywhere between 30%-80% of the Ixi's body should be covered by Partial Translucence.

Partial Translucence patches have about the same rules as Translucent itself, but localized to the patches:

• The Ixi should have translucent skin, with their internal structure visible in some way - musculature, bones, blood color tinting the translucent patches, etc.
• While internal organs can show in Partial Translucence please don't make them extremely graphic and gory - something one might find in an anatomical model is fine! Something extremely veiny or necrotic is best saved for your own art. We'd rather not use the mature filter on the masterlist if we can help it.
• Unless altered by a mutation, flesh/organ colors should be within reasonable flesh/organ colors, and bones should be believable as a bone color (discoloration is absolutely allowed, paint would have to be applied via cosmetics, etc. - I'm not going to ask how you got paint inside your body, I'm assuming surgery.)

Corona 0077's translucence and chimera layers, to show an example of how Partial Translucence works:

Corona's translucence is a 50% opacity white layer that's vaguely cloudy and blended in parts. This is overtop the bone layer (bone layer is 82% opacity), which in turn is over a 100% opacity layer of their red blood color that blends out to translucent at the edge. All of this is over a base coat layer.

Optional design packs for adding a skeleton:
Translucent Design Pack #1 (Standard)
Translucent Design Pack #2 (Primal)
Translucent Design Pack #3 (Domestic)
Translucent Design Pack #5 (Dwarf Primal)
Translucent Design Pack #4 (Dragon Body Standard)
Translucent Design Pack #4.2 (Dragon Body Primal)
Translucent Design Pack #4.3 (Dragon Body Domestic)

Partial Translucence is a combination mutation:
Partial Translucence has a 20% chance of passing when both Bicolor and Fogshard (or Partial Translucence itself) are present in the breeding. Combination Mutations do not automatically pass if both mutations that make it up make it onto a Rixixi.
It can also be passed naturally at a common or uncommon rate by Domestics.
It can also be passed naturally at its usual rate by Funeraries.
If a Mutation Station is used, Bicolor or Fogshard can present visibly on the design without being present in the geno - one Mutation Station is required per mutation.

Large, bat-like wings. Can allow flight if the Ixi is strong enough.

• Wings are considered an extra appendage and markings in-range can spread to them. Markings that cover points can treat wings as if they were another limb.

Wings with webbing have specific rules:

• The webbing itself is considered a skin zone, and can be any color lighter or darker than the base coat, can be any marking color on the Rixixi, can be any natural skin tone color, or can be any color on the base coat swatch.
• The opacity of the webbing can be freely altered as long as it is still clearly visible.
• Markings can still spread to the webbing, but need to be present on the body somewhere - they cannot only appear on the skin unless the marking specifically says otherwise (eg. Flourish).

 
Light blue: Markings must appear somewhere here.
Medium blue: Markings can appear somewhere here, as long as they also appear in the light blue zone.

Large, feathered wings on the back. Can allow flight if the Ixi is strong enough.

• Wings are considered an extra appendage and markings in-range can spread to them. Markings that cover points can treat wings as if they were another limb.

This Rixixi has Mymber genes from somewhere in their lineage...

Found in the Mymber Pack: Standard | Primal | Domestic

• Mymber limbs can retract. As a result, Mumbling Ixi have strange biology that allow them to partially retract their second and third pairs of limbs. A base for retracted limbs is provided, as well as fully extended limbs based on the Separated Sleipnir base - you can use either, and if you really want, you can design both versions for your Ixi and link one in the bio.
• Markings in the area can extend to this mutation. The extra limbs, whether retracted or not, can count as additional limbs for markings that affect points.
• The mouth roots can be any legal flesh or skin color for the Rixixi, or can show the Rixixi's blood color on part or all of the mutation if desired - by default, Rixixi blood is red, but it can be modified by certain markings and mutations.

Mumbling is a combination mutation:
Mumbling has a 20% chance of passing when both Tendrils and Sleipnir (or Mumbling itself) are present in the breeding. Combination Mutations do not automatically pass if both mutations that make it up make it onto a Rixixi.
If a Mutation Station is used, Tendrils or Sleipnir can present visibly on the design without being present in the geno - one Mutation Station is required per mutation.